| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Power Source/Network | Section: Battery/Charging | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000003F1N000X |
| Title: POWER OUTLETS (INT): REAR POWER OUTLET SOCKET: INSTALLATION (2008 Sequoia) | ||
INSTALLATION
1. INSTALL POWER OUTLET SOCKET COVER
|
(a) Engage the 2 claws and install the power outlet socket cover. |
2. INSTALL POWER OUTLET SOCKET ASSEMBLY
|
(a) Engage the claw and install the power outlet socket assembly. |
3. INSTALL QUARTER TRIM PANEL ASSEMBLY RH (for Power Seat)
4. INSTALL QUARTER TRIM PANEL ASSEMBLY RH
5. INSTALL REAR FLOOR MAT SUPPORT PLATE
6. INSTALL ROPE HOOK ASSEMBLY
7. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH
8. INSTALL REAR DOOR SCUFF PLATE RH
9. INSTALL REAR FLOOR STEP NO. 1 COVER
10. INSTALL REAR FLOOR STEP NO. 2 COVER
11. INSTALL REAR SEAT CUSHION HINGE LOWER COVER RH
12. INSTALL REAR NO. 2 SEAT ASSEMBLY RH (for Manual Seat)
(a) Remove the rear No. 2 seat assembly RH
.
13. INSTALL REAR NO. 2 SEAT ASSEMBLY RH (for Power Seat)
(a) Remove the rear No. 2 seat assembly RH
.
14. INSTALL DECK BOARD BRACKET
15. INSTALL DECK BOARD REINFORCEMENT SUB-ASSEMBLY
16. INSTALL NO. 1 DECK BOARD SUB-ASSEMBLY
17. INSTALL ROPE HOOK ASSEMBLY
18. INSTALL LUGGAGE COMPARTMENT TRIM BOX
19. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY
|
|